full enclosed cnc fiber laser cutting machine 1000w 1080nm laser

Mga Detalye sa Produkto

Sertipikasyon: ISO9001: 2008

Mga Termino sa Pagbayad ug Pagpadala:

Minimum nga Dako sa Order: 1

Presyo: negosasyon

Mga Detalye sa Packaging: Kahoy nga kaso

Panahon sa Pagpadala: 7-15 ka adlaw

Kaarang sa Pagahatag: 1 nga yunit / bulan

Gilaraw nga Deskripsyon sa Produkto

Ngalan sa Produkto:	Full Enclosed Laser Cutting Machine , 1000W Metal Cutting Machine	Gahum sa Laser:	1000w 1500w 2000W
Laser Wavelength:	1080nm	Working Area:	3000 * 1500mm
Pagputol nga Pagkakapoy:	0-16MM (magdepende sa Gahum sa Laser)	Power Supply:	380v
Garantiya:	1 Tuig

Desciption sa Produkto

Integrated machine design:left and right collecting drawer on the left and right side of the machine,highly saving space

Fiber laser has high and stable function and lifespan which is over 100000 hours

Higher cutting quality and efficiency with cutting speed being up to 25m/min with perfect cutting edge

High performance reducer, gear and rack; Japanese guide and ball screw

Panguna nga Mga Hiyas

1. The middle part of the two platforms are not in the same level, which can Save time for feeding and unloading material in short time.
2. Fully enclosed design can greatly reduce damage to the health from the laser, especially for those countries who strictly required to the environmental protection.
3. The exchange platform with heavy capacity can be placed 8-10 mm carbon steel plate. The table has universal balls. There is a sheet metal clamping device beside the table, which can firmly fix the materials on the table to avoide workpiece movement.
4. If it was powered off or the chain was pulled off , the platform can be pushed in by hand. At the same time it has anti-collision protection device on the left side of the machine to protect of the machine from damaging.
5. The overall steel beam is very steel, the machine beam used a 17 mm thickness plate, and beam base’s thickness is about 30 mm.
6. Using the well-known brand of Taiwan helical rack, Taiwan's silver (HIWIN) 30 rail, good quality electronic devices, and Franch drive motor to ensure the accuracy of the machine work.
7. Faster Acceleration , repeated positioning accuracy is about 0.03mm,and its cutting accuracy can reach 7-8 silk.
8. Dust cover is made of the fire-retardant materials.There will not be break and pull off with a long time use, at the same time it can prevent the spark burning.

Mga detalye sa Teknikal

^{Ang haba nga laser}	^1080nm
^{Pagputol nga gibag-on}	^0.2-16mm
^{Ang gahum sa output sa laser}	^1000W
^{Labing kadaghan sa pagproseso}	^{3000 * 1500mm}
^{Ang mode sa drive sa makina}	^{imported nga rack gear ug pinon drive}
^{Y X. axis pagpunting katukma}	^{± 0.01mm}
^{Ang XY axis nga gisubli ang kawastuhan sa pagpunting}	^{± 0.01mm}
^{Linya sa suplay sa kuryente}	^{380V / 50Hz}
^{Labing kadaghan sa katulin sa pagputol}	^{45m / min}
^{Minimum nga gilapdon sa linya sa linya}	^0.02mm
^{Mode sa Paglamig}	^{3P Paglamig sa tubig}

Mga Detalye sa Laser Pagputol sa Machine

Gigamit nga mga materyales

Panguna nga gigamit alang sa pagputol sa carbon steel, silikon nga asero, stainless steel, aluminum alloy, titanium alloy, galvanized steel sheet, pickling board, aluminum zinc plate, tumbaga ug daghang mga klase sa metal nga mga materyales sa pagputol ug uban pa.

Applied Industrie

Gi-apply sa sheet metal processing, aviation, spaceflight, electronics, electrical appliances, subway parts, automobile, makinarya, katumpakan nga sangkap, barko, metalurhiko nga kagamitan, elevator, gamit sa balay, regalo ug arte, pagproseso sa tool, adornment, advertising, metal foreign processing nga lainlain industriya nga pagproseso sa paghimo.